Description
The PU220D is a brass-bodied, two-way assisted-lift solenoid valve for water service. It is normally closed, operates from zero differential pressure and is shown with WRAS-approved EPDM seals in the legacy technical data.
Technical specification
- Media: water
- Pressure range: 0 to 10 bar maximum, subject to coil selection
- Media temperature: up to +90°C
- Ambient temperature: -20°C to +60°C maximum
- Maximum media viscosity: 50 cSt
- Mounting: coil upright
- Opening time: 50 ms maximum
- Closing time: 500 ms maximum
- Body: brass, with stainless-steel internals
Available configurations
- BSP sizes from 3/8 to 1 inch
- BSP and NPT thread routes
- 12, 24 and 48 V DC; 24, 48, 110, 230 and 380 V AC options
- 0-6 bar with a 15 W coil, or 0-10 bar with a high-power 18.5 W coil
- ATEX 10.1 W coil route for duties up to 3 bar
The technical data sheet is included in the image gallery. Final suitability and current approval status must be confirmed for the water quality, pressure, temperature, connection and electrical requirements at quotation.
Reviews
There are no reviews yet.